Distribution board panels SHO-06

DISTRIBUTION BOARD PANELS SHO-06

Distribution board panels SHO-06 are designed for receiving and distributing three-phase alternating current electrical energy with a frequency of 50Hz and a voltage of up to 660V and protecting outgoing lines from overloads and short-circuit currents.

Climatic type U3 according to GOST 15150.

Normal operation of the SHO is ensured under the following conditions:

1. Altitude above sea level - no more than 1000 m;

2. Environment - non-explosive, not containing conductive dust, aggressive gases and vapors in concentrations that reduce the parameters of the KTP to unacceptable limits;

3. Wind speed up to 36 m/s (wind pressure speed up to 800 Pa);

4. Atmosphere type - II according to GOST15150.

SHO panels are manufactured in two versions according to the degree of protection (the first digit of the panel designation):

1 – open (degree of protection IP00 and only from the facade side – IP20);

2 – closed (degree of protection IP20 and only from the bottom side – IP00).

By purpose, the panels are divided into entrance, sectional, distribution and auxiliary. Auxiliary panels include dispatching control panels, metering cabinets and end panels.

With a two-row installation of panels, the switchgear is equipped with a bus bridge with a distance between the facades of -1000, 1500 and 2000 mm.

The panels are equipped with the following equipment:

1. Incoming and sectional - with automatic circuit breakers of withdrawable and fixed design and circuit breakers,

2. Distribution - with automatic circuit breakers of withdrawable or fixed design, circuit breakers with RPS fuses or insulated circuit breakers with RBK or ARS fuses.

Upon order, the product is equipped with reactive power compensation units.

The panels are assembled into transport groups up to 4 m long.

Example of ordering an incoming panel ShChO of protection class IP00 with a rated input current of 1600 A, made according to scheme 01

Panel ShChO-06-1101 U3 TU U 31.2-14152239-004:2006,

Example of ordering a busbar bridge with a distance between the facades of the chambers of 1000 mm.

Busbar bridge ShM-2 U3 TU U 31.2-14152239-004:2006.

When ordering, it is also necessary to indicate the customer's payment and shipping details.

Main technical parameters of the panels SHO

1) Custom-made panels are equipped with circuit breakers OEZ (Czech Republic), EFEN (Germany), ETI (Slovenia), ABB, Siemens, Merlin Gerin, Schneider Elektrik, Moeller and others.

2) When ordering, fill out the questionnaire and the panel layout plan.

Example of filling out a questionnaire.

Panel layout plan