Complete transformer substations KTPS-25...250/10(6)0.4 U1 (Pillar) TU U 3.2

COMPLETE TRANSFORMER SUBSTATIONS KTPS-25...250/10(6)0.4 U1 (Pole) TU U 3.2-14152239-001:2004

Complete transformer substations with a capacity of 10-400 kVA of three-phase alternating current with a frequency of 50 Hz with a voltage of 10(6)\0.4 kV are single-transformer substations, dead-end type of outdoor installation and are intended for power supply of agricultural consumers, individual settlements and small industrial facilities in areas with a temperate climate (from -45°C to +40°C).

Type of climatic design U1 according to GOST15150.

Normal operation of KTPM is ensured under the following conditions:

1. Altitude above sea level - no more than 1000 m;

2. The environment is non-explosive, does not contain conductive dust, aggressive gases and vapor concentrations that reduce the characteristics of the KTP within unacceptable limits;

3. Wind speed up to 36 m/s (wind pressure speed up to 800 Pa);

4. Atmosphere type - II according to GOST 15150.

The KTP consists of the following parts:

1. Device on the higher voltage side (PVN);

2. Power transformer for outdoor installation, three-phase TM (TMG) or single-phase OM-10(6) kV;

3. Switchgear on the lower voltage side (RPNN) with circuit breakers on outgoing lines and street lighting lines (optional).

An example of ordering a 250 kVA KTPS with a network voltage of 6 kV

KTPS -1B- 250/6/0.4 U1 TU U 3.2-14152239-001:2004.

When ordering, it is also necessary to indicate the customer's payment and shipping details.

Main technical parameters of the substation

At the customer's request, it is possible to replace circuit breakers on outgoing lines, as well as replace a single-line circuit with specified parameters.